Hey folks, Phil Zito here and welcome back. In this post, we are going to be covering how to close out your projects. So up to this point, we've kicked off our projects, we've executed them, we've done the programming, the graphics, the install,we've dealt with the commissioning agents, we dealt with test and balance, and we are coming up to that point where we need to finish up our project.  

Hey folks, Phil Zito here and welcome back. In this post, we are going to be talking about how to work with a commissioning agent.  

Hey folks, Phil Zito here and welcome back. In this post, we're going to be talking about working with test and balance. We're going to cover what test and balance is, how you work with them, what you need to be aware of, the different types and levels of work thatyou could be doing with them, and a bunch of other stuff.  

Hey folks, Phil Zito here and welcome back. In this post, we're going to be covering how to work with IT groups. So, below you will find all the resources we reference in this post.  

Hey folks, Phil Zito here and welcome back. In this post, we're going to be covering how to program from submittals or basically just how to program from any sequence of operations documentation.  

Hey folks, Phil Zito here and welcome back. In this post, we are going to be discussing how to perform graphics and front-end setup.  

Hey folks, Phil Zito here, and welcome back! So, this post is going to be about how to validate, installation and perform point-to-point checkout. So, if you've been following along with this series on construction, which I highly encourage you to start at the beginning atHow to Perform Sales to Operation Handoffs,I encourage you to go through all of those posts. We've come to the point now, where we've lined out our subcontractors, we've scheduled out our labor, we've created our submittals and got them approved, we've ordered our material, our subcontractors have installed the material, and now we need to validate our installation and perform our point-to-point checkout.  

Hey folks, Phil Zito here and welcome back! In this post, we are going to be discussing how to manage project costs. This post is sponsored by ourProject Management Bootcamp course.If you are looking to learn more about project management, and you would like to learn how to run your building automation projects profitably and on time, then you definitely need to check out this course.  

Hey folks, Phil Zito here and welcome back. In this post, we are going to be discussing how to schedule out labor and common tasks for your building automation projects. So, up to this point in our BAS project management and operations series, we have talked through sales to operationshandoffs, performing takeoffs and re-estimates, creating submittals and project documents, and lining out our subcontractors.  

Hey folks, Phil Zito here and welcome back.Today, we're going to be talking about how to line out subcontractors. So, up to this point we've talked about performing a sales to operations handoff, we have talked about performing takeoffs and re-estimates, and we've talked about creating submittals and project documents.